Switch - Hazard Warning (Remove and Replace)

FRT No: 17407002

Removal

  1. Remove the MCU/touch screen (refer to procedure).
  2. Remove the screws (x2) that secure the hazard warning switch to the touch screen surround (torque 1 Nm).
    Note: Components have been removed in this graphic to aid clarity.

    View large image.

  3. Disconnect the electrical connector from the hazard warning switch.
    Note: Components have been removed in this graphic to aid clarity.

    View large image.

  4. Remove the hazard warning switch from the touch screen surround.

Installation

Installation procedure is the reverse of removal.