Switch - Window Lift - Driver's (Remove and Replace)

FRT No: 11502502

Removal

  1. Remove the driver's door trim panel (refer to procedure).
  2. Move the NVH padding aside to access the switch pack.
    Caution: Take care not to damage component(s).
  3. Disconnect the electrical connector from the switch pack.

    View large image.

  4. Remove the screws (x3) that secure the switch pack to the door trim panel (torque 0.5 Nm).

    View large image.

  5. Remove the switch pack by lifting it through the opening in the door trim panel.

Installation

Installation procedure is the reverse of removal, except for the following:
Caution: Replace any broken clips.