Shield - Dust - Brake - Front - LH (Remove and Replace)

FRT No: 33011602

Removal

  1. Remove the front brake rotor (refer to procedure).
  2. Remove the screws (x3) that secure the dust shield to the knuckle (torque 8 Nm).
    Note: If a screw is equipped with a spacer, ensure that the spacer is reinstalled on that screw during reinstallation.
    Note: Components have been removed in this graphic to aid clarity.

    View large image.

  3. Remove the dust shield from the vehicle.

Installation

Installation procedure is the reverse of removal, except for the following:

Note: Clean the affected areas before installation.