Reservoir - Air Suspension (Remove and Replace)

FRT No: 31102502

Removal

  1. Raise and support the vehicle (refer to procedure).
  2. Depressurize air reservoir (refer to procedure).
  3. Remove underhood storage unit (refer to procedure).
  4. Disconnect 12V power (refer to procedure).
  5. Remove the air line.
    • For vehicles manufactured before November 2013: Release the air line on the reservoir side of the fill valve.
    • For vehicles manufactured November 2013 and later: Unscrew the main air line connector from the reservoir (torque 5 Nm).
    Caution: Plug pipe connections to prevent ingress of moisture or dirt.
  6. Support the reservoir and remove the retaining screws (x2) on the mounting straps.
    • For vehicles manufactured before November 2013:
    • For vehicles manufactured November 2013 and later:
  7. Remove the reservoir.

Installation

Installation procedure is the reverse of removal, except for the following: