Camera - Rear Facing (Remove and Replace)

FRT No: 21101102

Removal

  1. Remove the tailgate lower finisher (refer to procedure).
  2. Pull back the watershield for access to the rear camera electrical connector.
  3. Disconnect the rear camera electrical connector.
  4. Remove the liftgate applique (refer to procedure).
  5. Remove the screws (x3) that secure the rear applique bracket to the tailgate (torque 2.4 Nm). Remove the applique bracket.
  6. Remove the screws (x2) that secure the camera to the applique bracket (torque 2.4 Nm).
  7. Release the grommet from the tailgate opening.
  8. Remove the camera assembly from the vehicle.

Installation

Installation procedure is the reverse of removal.