Subframe Assembly - Rear (Remove and Replace)

FRT No: 30010202

Removal

  1. Remove the rear drive unit:
  2. Remove the rear sway bar (refer to procedure).
  3. If the vehicle is equipped with air suspension, remove the bolt that secures the LH ride height sensor bracket to the subframe (torque 7 Nm). Remove the sensor and bracket.
  4. Repeat the previous step to remove the RH ride height sensor and bracket.
  5. Release the harness clips (x11) from the subframe assembly.
  6. Remove the rear subframe harness.

Installation

Installation procedure is the reverse of removal.