Powertrain Coolant Pump 2 (Remove and Replace)

FRT No: 18308202

Coolant pump locations:

RWD Model S Dual Motor Model S
1 Powertrain coolant pump 1 RWD vehicle
2 Battery coolant pump 2 RWD vehicle
3 Battery coolant pump 1 RWD vehicle
4 Powertrain coolant pump 2 Dual Motor vehicle
5 Powertrain coolant pump 1 Dual Motor vehicle
6 Battery coolant pump 2 Dual Motor vehicle
7 Battery coolant pump 1 Dual Motor vehicle

Removal

  1. Disconnect 12V and HV power (refer to procedure).
  2. Remove the HV battery (refer to procedure).
  3. Place suitable absorbent material beneath the pump.
  4. Clamp and release the 2 coolant hoses.
  5. Release the bolts (x2) that secure the coolant pump bracket to the body. Support the pump and disconnect the low voltage connector.
  6. Remove the pump from the bracket.

Installation

Installation procedure is the reverse of removal, except for the following:
  • Clean any spilled coolant.
  • When all components have been reinstalled, refill and bleed the cooling system (refer to procedure).