Light - Fog/Reverse - Rear - LH (Remove and Replace)

FRT No: 17402702

Removal

  1. Remove the liftgate applique (refer to procedure).
  2. Remove the tailgate lower finisher (refer to procedure).
  3. Release the watershield for access to the fog/reverse lamp.
    Note: A new watershield might be required if the adhesive is unable to secure it in position during reinstallation.
  4. Disconnect the fog/reverse light connector.
  5. Remove the nuts (x4) that secure the lamp assembly to the tailgate panel (torque 4 Nm).
  6. Remove the fog/reverse lamp assembly.

Installation

Installation procedure is the reverse of removal, except for the following:
Caution: Ensure that the foam gasket is completely flush with the fog/reverse light before installing.
  • When securing the lamp to the tailgate panel, secure the nuts in the order shown (torque 4 Nm).