Air Line - Air Suspension - Valve Block Exhaust (Remove and Replace)
FRT No: 31104702
Removal
Raise and support the vehicle
(refer to procedure)
.
Remove the underhood storage unit
(refer to procedure)
.
Release the fitting from the valve block (torque 3.5 Nm).
Caution:
Plug the line connection to prevent ingress of moisture or dirt.
Release the air line clip.
Installation
Installation procedure is the reverse of removal, except for the following:
Install a new fitting into the valve block before installing the air line.
Note:
Ensure that the collet is 4.3 mm from the end of the air line to prevent air pressure restriction.